Pay attention to these points and improve the production of your sand making machine

What is the reason for the relatively low output of sand making machine? Obviously a lot of, why in use soon less and less? In actual production, the yield of machine-made sand is related to many factors. For example :(hardness, humidity of materials, fineness of finished sand, maintenance and quality of equipment itself, etc.) there are many factors that affect the output of sand making machine.

The fineness of finished sand is different

The higher the fineness requirement, that is, the finer the material produced by sand making is required, the smaller the sand making capacity is. Generally, it depends on the fineness requirements of the concentrator. If there is no special requirement, the fineness of the material is generally set as medium fine. Sand production capacity and energy consumption of equipment with different sand making models are different during operation. Users need to buy the right type of sand making machine, otherwise the output of the equipment will be affected and the production cost may be higher.

Whether the operation is standardized

Regular maintenance The standard operation and regular maintenance of sand making machine will also affect the sand output of equipment. If a sand making machine is not standardized in operation and does not do regular maintenance, it will cause accelerated wear of vulnerable parts of the equipment, greatly reduce the life of the equipment, and the production per unit time is small.

The quality of sand making machine itself

A quality system sand machine, not only energy-saving, environmental protection, equipment and can easily achieve the desired output, not only such, manufacturers in the production of high quality equipment to choose new high wear-resisting material, USES, production technology, production equipment, can well meet the production demands of users, for the continuous, high efficiency, provide favourable guarantee of safe production. Whether the scheme design of sand production line is appropriate is related to all the equipment of the whole production line. For example, if your output requires 500T /h, then you can not only require the production of sand machine to reach 500T, and the processing capacity of the front jaw break, cone break, belt machine and so on should also match it, otherwise the output will certainly not reach.

In short, the configuration of a production line should be considered comprehensively to meet your capacity requirements. In the purchase to consider their own production situation, Yuhong machine can also be tailored to your production line scheme for you to avoid these factors.

<<Previous： How to dry fresh pig manure?
<<Next：none